SpaceX will launch four dozen Starlink internet satellites and land the return rocket Wednesday, March 9, and you can watch the action live.

One step in two steps Falcon 9 The rocket topped with 48 Starlink spacecraft is scheduled to lift off from Cape Canaveral Space Force Station in Florida on Wednesday at 8:45 a.m. EST (1345 GMT). If all goes as planned, approximately nine minutes later the Falcon 9 first stage will descend for a vertical landing on the SpaceX A Shortfall of Gravitas drone, which will be stationed in the Atlantic Ocean a few hundred miles off the coast of Florida.

Space is important to us, which is why we strive to provide you with the best coverage of industry and launches in Florida. Journalism like this takes time and resources. Please support him with a subscription here.

—

Space Force forecasters predict solidly favorable weather for SpaceX’s next launch on Tuesday, a mission that should boost another batch of Starlink internet satellites.

Forecasters say conditions at Cape Canaveral Space Force Station are expected to be 80% “one way” for a Falcon 9 rocket launch window that runs from 8:56 a.m. to 10:57 a.m. EST. Some cloud, however, may persist around Launch Complex 40 through Tuesday.

“A collision with a sea breeze from Monday evening through early Tuesday morning will cause downpours to move east over central Florida, and these downpours have the potential to linger into the launch window,” said Space Launch Delta 45 forecasters. said sunday. “The primary weather concern for Tuesday’s launch attempt is the cumulus rule.”

SpaceX will launch more than four dozen satellites and land the return rocket on Monday (February 21), and you can watch the action live.

A two-stage Falcon 9 rocket topped by SpaceX’s 49 Stellar Link The broadband spacecraft is scheduled to lift off from Cape Canaveral Space Force Station in Florida on Sunday at 9:44 a.m. EST (1444 GMT). You can watch it live here on Space.com, courtesy of SpaceX, or directly through the company. SpaceX’s webcast will begin approximately 15 minutes before launch.

KENNEDY SPACE CENTER, Fla. — A rocket launch scheduled for this weekend has been moved to Monday, according to SpaceX.

READ: The billionaire who flew SpaceX last year returning to orbit

SpaceX announced Saturday afternoon that a Falcon 9 rocket launch scheduled for Sunday has been postponed to Monday.

The company said the delay was due to weather issues for the recovery of the rocket’s first stage.

Space X IN SPACE – FEBRUARY 8: In this photo provided by SpaceX, a Tesla roadster launched from the Falcon Heavy rocket with a dummy pilot named ‘Starman’ heads for Mars. (Photo by SpaceX via Getty Images) (Handout/Getty Images)

Launch is now scheduled for Monday at 9:44 a.m. from Cape Canaveral Space Force Station.

WATCH: Elon Musk says SpaceX’s Starship spacecraft will launch from Kennedy Space Center

This launch is part of SpaceX’s Starlink mission.

SpaceX said Starlink’s goal is to create a network of satellites that will help deliver internet services to those not yet connected and deliver reliable, affordable internet around the world.

READ: SpaceX satellites fall out of orbit after solar storm

If the Falcon 9 rocket is launched, Eyewitness News will be covered live on Channel 9.

Click here to download the free WFTV news and weather apps, and Click here to watch the latest news on your Smart TV.

©2022 Cox Media Group

Five AlbaPod v2, the PocketQube deployers of Alba Orbital and additively manufactured by CRP technology were launched into orbit as part of SpaceX’s Transporter-3 mission using the Falcon 9 rocket. The deployers were produced using PBF polymer 3D printing and fiber reinforced composite material. Windform XT 2.0 carbon. The launch took place on Thursday, January 13^and2022.

The deployers completed their mission: once separated from the Falcon 9 rocket, the deployers began to launch the PocketQubes into orbit. These, in turn, began to send signals to earth.

With 13 PocketQube spacecraft embedded in five 3D-printed AlbaPods v.2 deployers, the mission represented Alba Orbital’s largest cluster to date and the first PocketQubes deployment of the Falcon-9 Transporter-3. It was the third dedicated launch for SpaceX’s small satellite ride-sharing service, which aims to give microsatellites and CubeSats a more affordable ride into orbit.

The Transporter-3 mission flew southeast of Cape Canaveral, then turned south, parallel to the east coast of Florida, to deliver the 105-passenger Falcon 9 rocket satellite to a polar sun-synchronous orbit. about 326 miles high (525 kilometers).

Engineer Franco Cevolini, CEO and CTO of CRP Technology, said: “Congratulations to Alba Orbital and all the teams that have flown with them, for all their hard work. On Thursday, January 13, 2022, a new milestone was reached in the field of nanosatellites: we are very proud, as a supplier of space-proven materials and technologies. This successful mission once again demonstrates the extreme value of Windform materials for high performance, rugged and critical applications.

SpaceX’s Transporter-3 mission, using the Falcon 9 rocket and the associated Alba Orbital mission “Alba Cluster 3 & 4”, consisted of the integration of the 13 PocketQubes into 5 of the 3D printed deployers in preparation for launch. It goes far beyond a one-time prototype process, into a real work production sector for CRP Technology and its US-based partner. United States CRP.

Four of the 13 PocketQubes who took part in the mission scored a “first”:

• “UNICORN-2A, 2D and 2E are Alba Orbital’s first Earth observation satellites designed to provide Earth’s highest resolution dataset at night.
• “PION-BR1 is the very first satellite developed by a Brazilian start-up.
• “GRIZU-263a is the very first Turkish pico-satellite to be launched into orbit, it was designed and built by Turkish student team Grizu-263 Uzay Takımı.
• TARTAN-ARTIBEUS-1 is the first intermittent orbital computing nanosatellite that operates without a battery aboard the SpaceX Falcon-9 Transporter-3 mission. This open source project was developed at Carnegie Mellon University

Other PocketQubes integrated into Alba’s 3D printed deployers were:

• MDQube-SAT1, an Argentinian 2p PocketQube developed by Innova Space, a “classroom transformed into a space startup”, carrying out an IoT mission.
• UNICORN-1, another PocketQube 2p built by Alba, designed in partnership with the European Space Agency – ESA.
• HADES’ & ‘EASAT, two PocketQubes 1.5p developed in Spain by AMSAT-EA and Hydra Space. They were designed for satellite communications between radio amateurs via a 145/435 MHz transponder.
• SATTLA-2A & 2B, open-source project developed by Ariel University in Israel. These PocketQubes 2p will use WiFi cards for an extremely long range link applicable to transmit video over 600 km under LOS conditions.
• DELFI-PQ, a PocketQube 3p developed in the Netherlands by TU Delft | Aerospace Engineering. This satellite is a technology demonstration mission testing a LOFAR payload and a laser retroreflector.

CAPE CANAVERAL, Fla. — After wiping out two previous attempts, Astra is set to attempt what would be the startup’s first-ever launch from the Space Coast for the third time.

>>> STREAM CHANNEL 9 LIVE EYEWITNESS NEWS <<

Monday’s launch was aborted at the last second due to a minor telemetry issue.

READ: OCPS superintendent Barbara Jenkins announces retirement

They canceled the initial launch attempt on Saturday due to a problem with the launch range radar system.

Astra is now targeting Thursday afternoon for the mission. The launch window opens at 3 p.m.

Astra is attempting to launch the Elana-41 mission for NASA. This is the company’s first operational mission.

READ: University of Florida’s first black student reflects on history

The launch will bring four Cubesats, or tiny satellites, into space for NASA, as well as the University of Alabama, University of California at Berkley and New Mexico State University.

NASA has chosen Astra Space and two other companies to launch miniature satellites to increase its role in exploration, technology, research and education.

Astra is the first launch vendor to receive a Part 450 license from the FAA. This is an accelerated license that allows for a higher launch rate and greater flexibility.

READ: Central Florida’s first Brightline train arrives in Orlando

Astra’s Rocket-3, which stands just 43 feet tall, was built to carry smaller payloads into orbit in an effort to expand access to space. Launching the company from the cape will be a major step towards achieving this goal.

According to its website, Astra, founded in 2016, aims to offer the “dedicated orbital launch service at the lowest cost per launch of any operational launch provider in the world”.

Click here to download free WFTV news and weather apps, Click here to download the WFTV Now app for your smart TV and Click here to broadcast live Channel 9 Eyewitness News.

©2022 Cox Media Group

Astra on Monday canceled its second first-time launch attempt from Cape Canaveral Space Force Station.

The scrub followed a launchpad abort shortly after the company was ignited 40-foot rocket, which the company calls Rocket 3.3 LV0008, or simply “Rocket”.

The abort occurred 50 minutes into the available three-hour launch window, giving time to try again, but business civil servants ultimately decided to wait another day.

astra, did not immediately announce a new targeted launch opportunity. The company’s founder and CEO, Chris Kemp, said on Twitter: “While we considered another attempt today, out of an abundance of caution, we are giving the team time to conduct a more comprehensive review of the data. ”

Rocket launch schedule: Upcoming launches and landings in Florida

Starlink Bonus:SpaceX launches Starlink satellites from Florida; advertised premium service

NASA Memorial Day:At KSC, those who gave their lives in pursuit of space exploration are honored

Astra completed its final countdown sequence and transfer to internal power at T-60 seconds. But after a successful ignition sequence of all engines, the computers automatically shut down the engines due to a “minor telemetry glitch”.

Rubbed attempt follows Saturday’s First Launch Opportunity which was canceled due to a failure of a range radar.

The mission, Educational Launch of Nanosatellites (ELaNa 41), is Astra’s first for NASA. It features a payload of four miniature satellites known as CubeSats. Three of the small payloads were designed and developed by universities, while the last was developed by NASA’s Johnson Space Center in Houston.

As well as being Astra’s first mission to NASA, it will also be the first satellite deployment for the company and its first launch from Cape Canaveral.

So far, Astra has only conducted launch operations from the Pacific Spaceport Complex in Kodiak, Alaska.

The California-based company’s first successful orbital test flight took place from Alaska in November 2021 aboard the previous iteration of its launch vehicle, Rocket 3.2 LV0007. Although the launcher was able to reach orbit, no payload was deployed.

Astra’s stated mission is to build cheap, easy-to-fly rockets using off-the-shelf parts and methods. At just 40 feet tall, Astra’s rocket is much smaller than those typically launched from Cape Town. SpaceX’s Falcon 9, for example, is 230 feet tall.

From start to finish, Astra’s Rocket 3.3 and its necessary supporting equipment are compact enough to be installed and shipped in standard shipping containers. “We can really get a pad up and running in days with a red team of about five people,” said Carolina Grossman, director of product management at Astra. “We really design our system to be as agile as possible,” she continued.